Getting Started - Denver BTS-400 Manual De Instrucciones

If the remote is not to be used for an extended period of time, remove the battery.
An old or leaking battery can cause damage to the remote and may void the
warranty.
Do not dispose of batteries in fire. Batteries may leak or explode.
Do not try to recharge batteries that are not intended to be recharged; they can
overheat, rupture and leak (Follow battery manufacturer's directions).
ACCESSORIES
1 x Remote Control (include 1PC button cell CR2032)
1 x User manual
1 x Line-in cable

GETTING STARTED

WARNING: Do not apply power to the unit until all of your connections are made.
1. Plug the AC cord plug into a convenient AC wall outlet.
2. The power indicator will be lights up with 'Red' colour. The unit enters into
'STANDY BY' Mode.
2. Press the Button on main unit or press & hold the
turn on the unit.
3. Press and hold the
on the unit to switch the unit back to Standby
4. Remove the power plug out of the AC wall outlet if you want to switch off the main
voltage completely.
How to change the play mode
Press the MODE Button during power on, the play mode will be changed between
the Bluetooth mode and AUX-IN mode, the power indicator will be in different colour
during different play mode:
Green colour for Aux-in mode
Blue colour for Bluetooth mode
Button on main unit or the
4
key on remote control to
key on remote control to turn
mode.