StreamLight TLR-1 Serie Instrucciones De Funcionamiento página 5

Rail Keys
Four polymer rail keys (included) allow the TLR to be attached to a variety of firearms: GL -Glock or "universal"
rails; 1913 – Mil Std-1913 (Picatinny); SW - TSW & 99, and Beretta - 90two.
GL
Each rail key is stamped for easy identification and the keys
share a common key screw and hex nut. Each key has a hex
nut cavity in the base.
6- Lock
(Latch will stop against top of door)
1913
1. Select the appropriate key and insert a hex nut into the
cavity in the base of the key. Note: Adjust the hex nut so
no portion protrudes from the key.
2. Hold the rail key (hex nut side up) and the TLR
(key pocket side down) and align the two.
3. Insert the key into the TLR key pocket and use a 7/64"
hex wrench to secure it with the key screw.
NOTE: A key MUST be used or the TLR will slide
off the front of the rail under recoil.
5- Swing Door Closed
(Apply Force)
TSW/99
Hex Nut Cavity
90two