Setting The Time; Weekly Programming - Kingfisher HLXF10A3T41T Manual Del Usuario

SETTING THE TIME

- Press MENU to display Πod, then press + to access
the Hor menu.
- Press OK-boost to enter this menu.
- Press + or - to set the day of the week :
d1 = Monday, d2 = Tuesday,...., d7 = Sunday.
- Press OK-boost to validate
- Press + or - to set the hour.
- Press OK-boost to validate.
- Press + or - to set the minutes.
- Press OK-boost to validate.
- Press + or - to select automatic (Aut) or manual (ΠAn) time setting.
- Press OK-boost to validate.
- Press MENU to exit the menu
If the icon permanently flashes in programme mode (Pro or EcP), this
indicates that the time is offset following a power cut. It is flashing as a time
has not been set.
Following a power cut, the appliance will automatically restart with all of the
settings used before the cut (if it was on or standby before the cut, it will
stay on or standby after the cut).
Automatic time setting is not possible outside France.
Select manual time setting if daily automatic time setting is incorrect.

WEEKLY PROGRAMMING

The time must be set before any programming.
There are two programmers available. They comprise 6 programs: Pr1 to
Pr6 for one, and 3 programs, Ec1 to Ec3 for the other. Selecting Pro or EcP
mode activates one or the other.
Each program defines a time period in which the setting can be Comfort or
Boost (only for Pr1 to Pr6). Outside time periods, the setting is ECO.
The time period for one program may overlap the time period of another. In
this case, the higher number program has priority.
11
Quick start