Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Chrysler Data Interface 2013-up
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Can be used in both amplified and non-amplified models
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
• Retains the factory backup camera (if displayed through the OE radio)
• Retains the 3.5mm AUX-IN jack
• Retains balance and fade
• Micro "B" USB updatable
CHRYSLER
200 LX
2015-up
DODGE
Dart (small screen option)
2013-up
Axxess Integrate
Installation instructions for part XSVI-6523-NAV
XSVI-6523-NAV
INTERFACE FEATURES
APPLICATIONS
FIAT
500L
2014-up
500X
2016-up
JEEP
Cherokee Sport
2014-up
Renegade
2015-up
axxessinterfaces.com
RAM
1500/2500/3500
(small screen option) 2013-up
Chassis Cab 3500/4500/5500
(small screen option) 2013-up
Promaster
2014-up
Promaster City
2015-up
•
metraonline.com
TABLE OF CONTENTS
Connections to be made ................................................... 2
Installing the XSVI-6525-NAV .......................................... 3
Initializing the XSVI-6525-NAV ........................................ 3
INTERFACE COMPONENTS
• XSVI-6523-NAV interface • XSVI-6523-NAV harness
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
Publicidad
Tabla de contenido
Manuales relacionados para Axxess XSVI-6523-NAV
Resumen de contenidos para Axxess XSVI-6523-NAV
- Página 1 • Provides accessory power (12-volt 10-amp) INTERFACE COMPONENTS • Retains R.A.P. (retained accessory power) • XSVI-6523-NAV interface • XSVI-6523-NAV harness • Can be used in both amplified and non-amplified models • Provides NAV outputs (parking brake, reverse, and speed sense) TOOLS REQUIRED •...
-
Página 2: Connections To Be Made
XSVI-6523-NAV Connections to be made From the XSVI-6523-NAV harness to the aftermarket radio: The following (3) wires are only for multimedia/navigation radios that require these wires. • Connect the Black wire to the ground wire. • Connect the Blue/Pink wire to the VSS/speed sense wire. - Página 3 Attention! If the interface loses power for any reason, the following steps will need to be performed again. Also, if installing an ASWC-1 connect it after you initialize and test the • Connect the XSVI-6523-NAV harness into the interface, and then to the harness in interface/radio, with the key in the off position.
-
Página 4: Important
Installation instructions for part XSVI-6523-NAV IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. -
Página 5: Chrysler Interfase De Datos 2013 Y Mas
COMPONENTES DE LA INTERFASE • Retiene R.A.P. (corriente de accesorio retenida) • Interfase XSVI-6523-NAV • Arnés XSVI-6523-NAV • Puede ser utilizado en ambos modelos amplificados y no amplificados • Proporciona salidas de NAV (freno de mano, reversa, silencio y sensor de velocidad) HERRAMIENTAS REQUERIDAS •... -
Página 6: Conexiones Que Se Deben Hacer
XSVI-6523-NAV Conexiones que se deben hacer Desde el arnés XSVI-6523-NAV al radio de mercado secundario: Los siguientes (3) cables son para radios de mercado secundario con multimedios/ navegación que tienen estos cables. • Conecte el cable negro al cable de tierra. -
Página 7: Instalación Del Xsvi-6523-Nav
Si va a utilizar el ASWC-1, conéctelo después de inicializar • Conecte el arnés XSVI-6523-NAV a la interfase, y luego al arnés en el vehículo. y probar el interfase/radio con la llave en la posición de apagado. -
Página 8: Importante
Instrucciones de instalación para la pieza XSVI-6523-NAV IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...