Alarm Time Setting - TFA 60.2018 Instrucciones De Uso

TFA_No. 60.2018_Anleitung 28.06.2017
Digital alarm clock
B 5: LOCK/SET switch
B 7: SNOOZE/LIGHT button
B 9: Battery compartment
6. Getting started
• Remove the protective film from the display.
• Open the battery compartment and insert three new AAA 1.5 V batteries.
• Close the battery compartment again.
• The indoor temperature (default °C) appears on the display.
7. Settings
7.1 Display change °C/°F
• Press the MIN/DATE/°C/°F button to select the temperature display in °C (Celsius) or °F (Fahrenheit) as temperature unit.
7.2 12-HR or 24-HR system
• Press the 12/24/YEAR button to choose between the 12-hour or 24-hour system. In 12-hour system AM or PM appears
on the display.
14:41 Uhr Seite 9
B 6: SENSOR ON/OFF switch
B 8: Light sensor
– 16 –
Digital alarm clock
7.3 LOCK/SET switch
• Press and hold the buttons in setting mode for fast mode.
• After setting slide the switch to the position LOCK.
7.3.1 Time setting
• Slide the switch to the position TIME SET.
• The time flashes on the display.
• Press the HOUR/MONTH button to adjust the hours.
• Press the MIN/DATE/°C/°F button to adjust the minutes.
7.3.2 Setting of the date
• Slide the switch to the position DATE SET.
• The date flashes on the display.
• Press the MIN/DATE/°C/°F, HOUR/MONTH and 12/24/YEAR button to adjust the date.

7.3.3 Alarm time setting

• Slide the switch to the position AL SET.
• The alarm time (default 6:00) will be flashing on the display.
– 17 – 17