Speaker Is Turning Off Automatically; Speaker Is Malfunctioning; Cannot Conduct A Call - Denon envaya DSB50BT El Manual Del Propietario

Contents Preparation

Speaker is turning off automatically

Speaker is turning off automatically.

To save battery power, the speaker is designed to turn off when no audio is played via Bluetooth for approximately 15 minutes. Power on the speaker
0
by pressing and holding the power button for 2 seconds. (v p. 10)
If the input of Envaya is set to AUX and it is not operated for approximately 8 hours, Envaya automatically turns off. Power on the speaker by pressing
0
and holding the power button for 2 seconds. To turn the AUX Auto Off function on or off, press and hold the battery button for approximately three
seconds while the input of this unit is set to AUX. (v p. 10)
The power turns off quickly.
If usage time is extremely short even when the battery has been fully charged, the battery may be near the end of its life. In this case, please contact
0
Denon service center.

Speaker is malfunctioning

Speaker is malfunctioning.

To reset the speaker, turn on the speaker then, press and hold the VOLUME+, VOLUME- and T button simultaneously for 5 seconds.
0
Envaya is reset. (v p. 26)

Cannot conduct a call

Cannot conduct a call

Hands-free phone calls cannot be conducted when a cable is connected to the AUX input. Remove the cable and try again. (v p. 11)
0
Not all mobile phones and Apps support Hands-free phone calling.
0
Connections Operation
25
Troubleshooting Appendix
Index