Parkside PADM 1250 A1 Traducción Del Manual De Instrucciones Original página 25

• Do not overload your power tool
– They work better and more safely
within the specifi ed power range.
• Use the correct power tool
– Do not use low-performance electric
tools for heavy work.
– Do not use the power tool for purpo-
ses for which it is not intended. For
example, do not use a circular hand
saw for cutting tree branches or logs.
• Wear suitable clothing
– Do not wear loose clothing or jewel-
lery that might become caught in
moving parts.
– When working outdoors, non-slip
footwear is recommended.
– Wear a hair net to contain long hair.
• Use protective equipment
– Wear safety goggles.
– Use a dust mask for work which gene-
rates dust.
• Connect a dust extraction
device
– If connections are available for dust
extraction and collection devices,
make sure that these are connected
and properly used.
• Do not use the cable for purpo-
ses for which it is not intended
– Do not use the cable to pull the plug
from the socket. Protect the cable
from heat, oil and sharp edges.
• Secure the workpiece
– Use jigs or a vice to hold the workpie-
ce securely. This is safer than using
your hand.
• Avoid abnormal body postures
– Ensure secure footing and keep your
balance at all times.
• Maintain tools with care
– Keep cutting tools sharp and clean
for better and safer working.
– Follow the instructions for lubrication
and changing tools.
– Regularly check the connection cable
of the power tool and, if it is dama-
ged, have it replaced by a qualifi ed
specialist.
– Check extension cords periodically and
replace them if they are damaged.
– Keep handles dry, clean and free
from oil and grease.
• Remove the plug from the
mains socket
– When the electric tool is not in use,
before maintenance and when chan-
ging tools such as the saw blade, drill
bit, milling cutter.
• Do not allow any tool keys to
remain inserted
– Check, before switching on, that keys
and adjusting tools have been removed.
• Avoid unintentional starting
– Make sure that the switch is off when
inserting the plug into the socket.
• Use extension cables outdoors
– Only use approved and appropriate-
ly marked extension cables outdoors.
• Pay attention at all times
– Pay attention to what you are doing.
Work using common sense. Do not
use the power tool if you cannot
concentrate.
• Check the power tool for possi-
ble damage
– Before further use of the power tool, sa-
fety devices or slightly damaged parts
must be carefully examined in respect
of their proper and intended function.
– Check whether the moving parts are
working properly and are not becoming
jammed or whether parts are damaged.
All parts must be correctly fi tted and
satisfy all conditions to ensure the
proper operation of the power tool.
– Damaged safety equipment and
parts must be repaired properly or
replaced by an authorised specialist
GB IE
25