Publicidad
Idiomas disponibles
Idiomas disponibles
FUNZIONAMENTO - WORKING - FONCTIONNEMENT - FUNKTIONSTÄTIGKEIT -
LIGHT CHECK CONTROL (if chromotherapy module is installed)
START/SWITCH OFF
It is switched on pressing any light check pushbutton: it starts with an automatic chromotherapy cycle.
To switch off push the key "ON/OFF" (with the system on).
WARNING: after 60 minutes from start the device switches off automatically.
AUTOMATIC CHROMOTHERAPY CYCLE
Automatic chromotherapy cycle start pushing any time the key "COLOUR"; cycle start is signaled by a blink
of white LEDs.
Color sequence is WHITE, RED, ORANGE, YELLOW, GREEN, LIGHT BLUE, BLUE, VIOLET.
The complete cycle lasts around 2 minutes (around 13 seconds per colour).
MANUAL COLOR SELECTION
Any time, pushing the bar "COLOUR SWEEP", the LEDs will execute the reference colour pushed; any
automatic program running will be stopped.
INTENSITY REGULATION
With enabled system, pressing the keys "LIGHT DIMMER", the LED intensity will be reduced or increased
according to the pressed key, without interfering with any automatic cycle.
AUDIO CHECK CONTROLS (IF THE AUDIO MODULE IS INSTALLED)
The remote control for the audio module check allows managing the following functions:
PLAY/PAUSE (BLUETOOTH PAIRING)
• E xternal audio device (not supplied) to be paired – Bluetooth pairing will be visible for a short period
pressing the audio module pushbutton.
• E xternal audio device (not supplied) already paired – Pressing the pushbutton manages the PLAY/
PAUSE function of the external audio device.
NEXT TRACK – PREV TRACK
Pressing one of the two pushbuttons switches to the next or previous song, if provided on the external
audio device.
VOLUME CONTROL
Pressing one of the two pushbuttons, sound intensity is increased or reduced.
FUNCIONAMIENTO - ИСПОЛЬЗОВАНИЕ - ΛΕΙΤΟΥΡΓΙΑ - 运行
10
Publicidad
