Resumen de contenidos para Sauder Rustic Country 412373
Página 1
CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE STORE. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
Página 2
• Check the size and weight of your TV. Compare it to the diagram below – before you begin assembly! • This Sauder unit is designed for use with televisions weighing less than 70 pounds. Never use with a TV that weighs more.
BACK PANEL (1) REAR DRAWER PANEL (2) LOWER FRONT CONNECT TUBE (1) MIDDLE PANEL (1) BOTTOM DRAWER PANEL (2) W SHORT DECORATIVE METAL (2) BACK SUPPORT PANEL (1) Q2 LEFT LEG FRAME (1) LONG DECORATIVE METAL (2) 412373 www.sauder.com Page 3...
Página 4
1" BOLT - 4 1" PAN HEAD SCREW - 3 1" FLAT HEAD SCREW - 8 1/2" BOLT - 12 1/2" MACHINE SCREW - 4 1/2" PAN HEAD SCREW - 40 1/2" FLAT HEAD SCREW - 16 Page 4 www.sauder.com 412373...
Página 5
Look for this icon. It means a Step 1 video assembly tip is available at www.sauder.com/services/tips Assemble your unit on a carpeted fl oor or on the empty carton å to avoid scratching your unit or the fl oor. Some assembly Fasten a CABINET RAIL SET (Y) to both surfaces of the å...
Página 6
Step 2 Fasten a CABINET RAIL SET (Y) to the LEG FRAMES (Q2 å and R2). Use four 1/2" FLAT HEAD SCREWS (WW). 1/2" FLAT HEAD SCREW (4 used for the RAILS) Roller end Roller end Page 6 www.sauder.com 412373...
Página 7
Fasten four METAL BRACKETS (EE) to the LEG å FRAMES (Q2 and R2). Use four 1/2" PAN HEAD SCREWS (VV). 1/2" PAN HEAD SCREW (4 used for the METAL BRACKETS) Use this hole (4 used) Use this hole Use this hole 412373 www.sauder.com Page 7...
Página 8
Step 4 Fasten the CONNECT TUBE (E) to the MIDDLE PANEL (I). å Use two 1-3/16" MACHINE SCREWS (PP). Tighten with the L-WRENCH (FF). 1-3/16" MACHINE SCREW (2 used in this step) Page 8 www.sauder.com 412373...
Página 9
(4 used for the CONNECT TUBE) Roller end These holes must be here. S u r f a c e w i t h h o l e 1" PAN HEAD SCREW (1 used in this step) 412373 www.sauder.com Page 9...
Página 10
Turn two 1" BOLTS (QQ) into the LEFT LEG FRAME (Q2). å Then, push the BACK PANEL (F) onto the pin of the 1" BOLT in the LEFT LEG FRAME. 1" BOLT (2 used in this step) 1/2" BOLT (1 used in this step) Page 10 www.sauder.com 412373...
Página 11
FRAME (Q2). Use a 1/2" BOLT (TT). Tighten with the L-WRENCH (FF). 1/2" BOLT (1 used in this step) These holes should be closer to this edge. 1/2" PAN HEAD SCREW (2 used for the METAL BRACKETS) 412373 www.sauder.com Page 11...
Página 12
TUBE (T). Use two 1/2" PAN HEAD SCREWS (VV) through the METAL BRACKETS on the MIDDLE CONNECT TUBE and into the MIDDLE SHELF. These holes must be here. 1/2" PAN HEAD SCREW (4 used for the METAL BRACKETS) Page 12 www.sauder.com 412373...
Página 13
Step 9 Fasten two LONG DECORATIVE METALS (X) to the long å edges of the BACK SUPPORT PANEL (J) as shown. Use four 1/2" PAN HEAD SCREWS (VV). 1/2" PAN HEAD SCREW (4 used in this step) 412373 www.sauder.com Page 13...
Página 14
Fasten the BACK PANEL (J) to the MIDDLE SHELF (B). å Use two 1" PAN HEAD SCREWS (RR). Caution Inspect the parts thoroughly before assembling. Disassembly of glued parts is extremely diffi cult. 1" PAN HEAD SCREW (2 used in this step) Page 14 www.sauder.com 412373...
Página 15
Step 11 Fasten six METAL BRACKETS (EE) to the CONNECT å TUBES (U and V) exactly as shown. Use six 1/2" PAN HEAD SCREWS (VV). 1/2" PAN HEAD SCREW (6 used for the METAL BRACKETS) 412373 www.sauder.com Page 15...
Página 16
LEFT LEG FRAME (Q2). Use two 1/2" BOLTS (TT). Now might be a Tighten with the L-WRENCH (FF). good time to refresh your drink. These holes should be closer to this edge. 1/2" BOLT (2 used in this step) Page 16 www.sauder.com 412373...
Página 17
TUBE, through the SHORT DECORATIVE METAL, and into the BACK SUPPORT PANEL. 1/2" BOLT (2 used in this step) The opposite surface holes should be closer to this edge. 2-15/16" PAN HEAD SCREW (2 used in this step) 412373 www.sauder.com Page 17...
Página 18
Step 14 Fasten four METAL BRACKETS (EE) to the BOTTOM å SHELF (C). Use four 1/2" PAN HEAD SCREWS (VV). 1/2" PAN HEAD SCREW (4 used for the METAL BRACKETS) Page 18 www.sauder.com 412373...
Página 19
TUBES (U and V). Use six 1/2" PAN HEAD SCREWS (VV) through the METAL BRACKETS on the CONNECT TUBES and into the BOTTOM SHELF. h o l i t h f a c S u r 1/2" PAN HEAD SCREW (6 used for the METAL BRACKETS) 412373 www.sauder.com Page 19...
Página 20
Fasten the RIGHT LEG FRAME (R2) to the CONNECT å TUBES (S, T, U, and V). Use six 1/2" BOLTS (TT). Tighten with the L-WRENCH (FF). 1" BOLT (2 used in this step) 1/2" BOLT (6 used in this step) Page 20 www.sauder.com 412373...
Página 21
RIGHT LEG FRAME (R2). Use two 1/2" PAN HEAD SCREWS (VV). Fasten the BOTTOM SHELF (C) to the LEG FRAMES (Q2 å and R2). Use four 1/2" PAN HEAD SCREWS (VV). 1/2" PAN HEAD SCREW (6 used in this step) 412373 www.sauder.com Page 21...
Página 22
Fasten the CASTERS (II) to the LEG FRAMES (Q2 å and R2). Use four 1-3/4" BOLTS (NN) and four NUTS (HH). Tighten with the HEX WRENCH (GG). 1-3/4" BOLT and NUT (4 used in this step) Page 22 www.sauder.com 412373...
Página 23
GLUE (KK) and insert three WOOD DOWELS (DD) into these holes. Wipe away the excess glue. Caution Inspect the parts thoroughly before assembling. Disassembly of glued parts is extremely diffi cult. (3 used) (6 used) 412373 www.sauder.com Page 23...
Página 24
LEG FRAMES and PANEL. Wipe away the excess glue. Caution Inspect the parts thoroughly before assembling. Disassembly of glued parts is extremely diffi cult. The arrow should be pointing up. (6 used) Page 24 www.sauder.com 412373...
Página 25
Fasten a HANDLE (JJ) to the RIGHT DRAWER FRONT (L). Use two 1/2" MACHINE SCREWS (UU). å 1" FLAT HEAD SCREW (8 used in this step) Groove 1/2" MACHINE SCREW (4 used for the HANDLES) (8 used) 412373 www.sauder.com Page 25...
Página 26
SLIDE. Repeat steps 21 and 22 for the LEFT DRAWER assembly å using the LEFT DRAWER FRONT (K). Roller end Roller end 1/2" FLAT HEAD SCREW (8 used for the SLIDES) Page 26 www.sauder.com 412373...
Página 27
Lift the front of the drawer up and slide it into the unit. Place the roller on the SLIDE behind the roller on the RAIL. 412373 www.sauder.com Page 27...
Página 28
NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. å And to celebrate, why not share your success story at Walmart.com or 70 lbs. 31,75 kg 31,75 kg 22,68 22,68 15 lbs. each Page 28 www.sauder.com 412373...
DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour TABLETTE SUPÉRIEURE ........1 JEU DE GLISSIÈRE D'ÉLÉMENT ......4 contacter Sauder en TABLETTE INTERMÉDIAIRE ........1 JEU DE COULISSES DE TIROIR ......4 ce qui concerne cet élément, faire référence TABLETTE INFÉRIEURE ..........1 GRANDE EXCENTRIQUE ESCAMOTABLE ..6 au numéro de lot et...
Página 30
! SUIF 13 mm (VV). • Cette unité Sauder est conçue pour les téléviseurs pesant moins Fixer le PANNEAU INTERMÉDIAIRE (I) sur le PANNEAU ARRIÈRE (F). de 31,75 kg. Ne jamais utiliser avec des téléviseurs plus lourds.
Página 31
Fixer le TUBE DE CONNEXION ARRIÈRE INFÉRIEUR (V) au Serrer à l’ a ide de la CLÉ EN L (FF). CADRE DE PIED GAUCHE (Q2). Utiliser deux BOULONS 13 mm (TT). Serrer à l’ a ide de la CLÉ EN L (FF). 412373 www.sauder.com Page 31...
Página 32
REMARQUE : Prière de lire les informations importantes sur la et du PANNEAU. Nettoyer l'excès de colle. sécurité fi gurant sur les pages arrière du manuel d’instructions. Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. Page 32 www.sauder.com 412373...
JUEGO DE RIELES DE GABINETE ....4 su referencia futura. Si JUEGO DE CORREDERAS DE CAJÓN ..4 ESTANTE MEDIO ............1 necesita ponerse en contacto con Sauder en EXCÉNTRICO ESCONDIDO GRANDE ..6 ESTANTE INFERIOR ...........1 cuanto a esta unidad, EXCÉNTRICO ESCONDIDO PEQUEÑO ....8 TUBO DE CONEXIÓN ..........1...
Página 34
- antes de comenzar el ensamblaje! REDONDA de 13 mm (VV). • Esta unidad Sauder está diseñada para ser usada con Fije el PANEL CENTRAL (I) al PANEL POSTERIOR (F). Utilice un televisores cuyo peso sea inferior a 31.75 Kg. Nunca la use para un TORNILLO DE CABEZA REDONDA de 25 mm (RR).
Página 35
Apriete con la LLAVE EN L (FF). PASO 12 Fije el TUBO DE CONEXIÓN INFERIOR FRONTAL (V) al MARCO DE LA PATA IZQUIERDA (Q2). Utilice dos PERNOS de 13 mm (TT). Apriete con la LLAVE EN L (FF). 412373 www.sauder.com Page 35...
Página 36
NOTA: Por favor, lea las páginas de atrás del folleto de LAS PATAS y del PANEL. Quite el exceso de pegamento. instrucciones en cuanto a importante información de seguridad. Esto completa el ensamblaje. Limpiar con un trapo húmedo. Seque con un paño. Page 36 www.sauder.com 412373...
Página 37
TOUJOURS décharger les tablettes et les tiroirs, en commençant par les surface supérieures, avant de déplacer le meuble. NE JAMAIS pousser ou tirer un meuble sur de la moquette. Demander à une autre personne de le soulever correctement pour le déplacer et/ou le repositionner. 412373 www.sauder.com Page 37...
Página 38
SIEMPRE descargue los estantes y cajones, empezando con las superfi cies superiores, antes de moverlo. NUNCA empuje ni tire de los muebles sobre una alfombra. Obtenga que un amigo le ayude a levantarlo correctamente para moverlo y/o reposicionarlo. Page 38 www.sauder.com 412373...
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Walmart.com in the product detail page. General Conformity Certifi cate 1. This certifi cate applies to the Sauder Global Sourcing Product identifi ed by this Instruction Book. 2. This certifi cate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).