Resumen de contenidos para Sauder Jaclyn Smith 416403
Página 1
Jaclyn Smith Gatsby Collection | 416403 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987.
Página 2
• Check the size and weight of your TV. Compare it to the diagram below – before you begin assembly! • This Sauder unit is designed for use with televisions weighing less than 50 pounds. Never use with a TV that weighs more.
BLACK 1-7/8" FLAT HEAD SCREW - 5 3S GOLD 5/16" FLAT HEAD SCREW - 24 BLACK 1-1/4" FLAT HEAD SCREW - 12 BLACK 7/8" MACHINE SCREW - 6 30S BLACK 1-9/16" FLAT HEAD SCREW - 15 Page 4 416403 www.sauder.com/services...
Página 5
Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. To begin assembly, push a SAUDER TWIST-LOCK® å FASTENER (7F) into the large holes in the HUTCH ENDS (C and D).
Página 6
Do not tighten the HIDDEN CAMS in this step. Arrow (22 used) Do not insert HIDDEN CAMS or CAM DOWELS into this long edge. Arrow Arrow Insert the metal end of the CAM DOWEL into the HIDDEN CAM. Page 6 416403 www.sauder.com/services...
EXTENSION RAIL in to fi nd the other hole that lines up with the hole in the END. Turn a SCREW into Open end this hole. Finished edge Open end Finished edge Push the release lever in and pull the SLIDE from the RAIL. www.sauder.com/services 416403 Page 7...
Step 4 Fasten the HUTCH LEFT END (D) to the TOP (F2). Use å two BLACK 1-7/8" FLAT HEAD SCREWS (2S). BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) Surface with TWIST-LOCK® FASTENERS Flat edge Page 8 416403 www.sauder.com/services...
Página 9
UPRIGHT (E) insert into the HUTCH RIGHT END (C). (4 used) Flat edge F i n i s h r f a Surface without TWIST-LOCK® FASTENERS BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) www.sauder.com/services 416403 Page 9...
Página 10
Step 6 Fasten the HUTCH TOP (G) to the HUTCH ENDS (C and D). å Tighten four TWIST-LOCK® FASTENERS. How to use the SAUDER TWIST-LOCK ® FASTENER 1. Insert the dowel end of the FASTENER into the hole of the adjoining part.
Página 11
Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Arrow Maximum tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees www.sauder.com/services 416403 Page 11...
Página 12
Step 8 Fasten the BACKS (I2) to the TOP (F2). Tighten four å HIDDEN CAMS. Maximum Arrow 210 degrees Minimum 190 degrees Page 12 416403 www.sauder.com/services...
Página 13
I D D S u r f a c i t h f e w e r H Edge with CAM DOWELS I D D Edge without CAM DOWELS Maximum Arrow 210 degrees Minimum 190 degrees www.sauder.com/services 416403 Page 13...
Página 14
BRACES (H2) insert into the holes in the RIGHT END (A). Finished edge i t h o f a c S u r D E N H I D Maximum Arrow 210 degrees Minimum 190 degrees Page 14 416403 www.sauder.com/services...
Página 15
Step Step 11 Fasten the BOTTOM MOLDING (N) to the BOTTOM å BRACE (H2). Tighten three HIDDEN CAMS. Rounded edge Unfi nished surface Maximum Arrow 210 degrees Minimum 190 degrees www.sauder.com/services 416403 Page 15...
Fasten the FRONT SKIRT (K) to the ENDS (A and B) and the å upper BOTTOM BRACE (H2). Use fi ve BLACK 9/16" LARGE HEAD SCREWS (1S). Flat edge BLACK 9/16" LARGE HEAD SCREW (10 used in this step) Page 16 416403 www.sauder.com/services...
Página 17
DRAWER FRONT (L). Use four BLACK 1-1/4" FLAT HEAD SCREWS (7S). Repeat this step for the other DRAWER FRONTS (L) and å DRAWER FRONT MOLDINGS (M). BLACK 1-1/4" FLAT HEAD SCREW (12 used in this step) www.sauder.com/services 416403 Page 17...
Fasten the DRAWER BRACE (J) to the DRAWER å å SIDES (D132 and D138) and DRAWER BRACE (J). Use five FRONT (L). Tighten one HIDDEN CAM. BLACK 1-9/16" FLAT HEAD SCREWS. (30S). Repeat this step for the other DRAWERS. Page 18 416403 www.sauder.com/services...
(6 used in this step) Screw head - turn CAM to line up holes in the SLIDES with holes in DRAWER SIDES D138 (6 used) Open end D132 GOLD 5/16" FLAT HEAD SCREW (12 used in this step) www.sauder.com/services 416403 Page 19...
Página 20
Refer to instruction book for complete safety information. Note: This is a permanent label. Do not try to remove. Surface will be damaged. 08/05 2 6 9 2 2 0 269220 Page 20 416403 www.sauder.com/services...
Página 21
BLACK 1-7/8" FLAT HEAD SCREW (1 used into a stud in your wall) BLACK 9/16" LARGE HEAD SCREW (1 used into the top of your unit) 50 lbs. 25 lbs. 35 lbs. 35 lbs. 35 lbs. www.sauder.com/services 416403 Page 21...
Página 22
The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. Page 22 416403 www.sauder.com/services...
élément et conserver le livret pour future référence. EXTRÉMITÉ DROITE ..........1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) Pour contacter Sauder EXTRÉMITÉ GAUCHE ..........1 GLISSIÈRE D'EXTENSION ........6 en ce qui concerne cet EXTRÉMITÉ DROITE DE SURMEUBLE ..1 COULISSE D'EXTENSION ........6...
Página 24
• Vérifi er la taille et le poids du téléviseur. Le comparer au diagramme ci-dessous avant de commencer l'assemblage ! Insérer quatre GOUPILLES EN MÉTAL (1R) dans le MONTANT • Cette unité Sauder est conçue pour les téléviseurs pesant moins de 22,6 kg. Ne DE SURMEUBLE (E). jamais utiliser avec des téléviseurs plus lourds.
Página 25
4 Fixer l'ARRIÈRE DE TIROIR (D197) aux CÔTÉS DE TIROIR (D132 et D138) et à l’ENTRETOISE DE TIROIR (J). Utiliser cinq VIS TÊTE PLATE 40 mm NOIRES. Répéter cette étape pour les autres tiroirs. www.sauder.com/services 416403 Page 25...
(JUEGO DE EXTENSIÓN SE MUESTRA POR SEPARADO) et conserver le livret pour future référence. EXTREMO IZQUIERDO ..............1 RIEL DE EXTENSIÓN ................6 Pour contacter Sauder EXTREMO DERECHO DE ORGANIZADOR ..... 1 CORREDERA DE EXTENSIÓN ..........6 en ce qui concerne cet EXTREMO IZQUIERDO DE ORGANIZADOR ....1 EXCÉNTRICO DE CORREDERA ..........6...
Página 27
Inserte las ESPIGAS DE METAL (1R) en uno de los extremos del PARAL DE • Esta unidad Sauder está diseñada para ser usada con televisores cuyo peso sea ORGANIZADOR (E) en los agujeros del EXTREMO IZQUIERDO inferior a 22,6 Kg. Nunca la use para un televisor de mayor peso.
Página 28
RIOSTRA DE CAJÓN (J). Utilice cinco TORNILLOS NEGROS DE CABEZA PERDIDA de 40 mm. Repita este paso para los otros cajones. Esto completa el ensamblaje. Para limpiar la unidad, humedezca un paño con agua de llave y limpie. Page 28 416403 www.sauder.com/services...
Página 29
équipé. • Blessure physique. Le mobilier peut être très lourd. • Ne pas pousser le mobilier, surtout sur la moquette. Se faire aider par une autre personne pour soulever l’élément et le mettre en place. www.sauder.com/services 416403 Page 29...
Página 30
• Lesión física. El mobiliario puede ser • No empuje la unidad, especialmente muy pesado. sobre un piso alfombrado. Pide la ayuda de otra persona en levantar la unidad y colocarla en lugar. Page 30 416403 www.sauder.com/services...
GARANTIE LIMITÉE DE 1 AN 1. Sauder Woodworking Co. (Sauder®) off re une couverture de garantie limitée à l’ a cheteur 4. La présente garantie ne s’ a pplique qu’ a ux défauts garantis qui se produisent pour initial du présent produit pendant une période un an à...
Página 32
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.