Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty carton
å
to avoid scratching your unit or the fl oor.
Fasten a CABINET RAIL SET (Y) to both surfaces of the
å
MIDDLE PANEL (I). Use four 1/2" FLAT HEAD SCREWS (WW).
Y
412373
1/2" FLAT HEAD SCREW
(4 used for the RAILS)
(R)
I
Roller end
These edges
must be even.
www.sauder.com
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
WW
(L)
Y
I
These edges
must be even.
Some assembly
(and snacks) required.
Use the second hole
from the roller.
Roller end
Use the fi rst hole
from the roller.
Page 5
Publicidad
