The Volume Control; Power Connection - Creative Cambridge SoundWorks Digital Guia Del Usuario

The Volume Control

The volume control contains the
power on/off switch and an LED
power indicator, as well as the master
volume control. Connect the volume
control to the subwoofer (see
diagram B on page 9). This control
can be mounted on the side of your
computer monitor or other surface
using the mounting strip provided.
The enclosed mounting strip holds
well but can be peeled off gently.
1
Remove protective paper from
one side to reveal adhesive.
3
Remove remaining paper strip.
Be sure that the mounting surface is
smooth and clean.
2
Press exposed adhesive side
firmly against back of volume
control.
4 Press volume control firmly
against mounting surface.

Power Connection

The speaker system uses an external
15-volt DC power supply. Insert the
small DC connector into the "15V
DC IN" receptacle on the subwoofer
(see diagram D). Insert the power
supply's AC plug into the
appropriate receptacle.
Please note that the type of
adapter varies according to country.
D
Caution: To prevent electric
shock, do not use a polarized plug
with an extension cord, receptacle, or
other outlet unless the blades can be
fully inserted to prevent blade
exposure.
11