Audio Signal Connections - Creative Cambridge SoundWorks Digital Guia Del Usuario

Audio Signal Connections

Digital Input
If you are connecting to Sound
Blaster Live! or an audio card with
the same type of SPDIF output jack,
connect the mono miniplug end of
the RCA-to-mono cable to the
SPDIF output jack on the card.
Connect the RCA jack of the same
cable to one RCA plug of the
RCA-to-RCA cable. Then connect
the other RCA plug to the SPDIF
Digital In on your SoundWorks
Digital subwoofer.
If your audio card has an RCA
SPDIF output, use the RCA-to-RCA
cable to connect it to SoundWorks
Digital.
If you are connecting to a
component CD or DVD player,
connect the RCA-to-RCA cable to
the SPDIF digital output on your
player. This is a single RCA jack
frequently marked "coaxial digital
out" or just "digital out." Portable
CD players with digital outputs
typically have a single 3.5mm mono
minijack.
SoundWorks Digital Subwoofer
B
Audio Card Output
Digital Out or other
SPDIF output jack
RCA-to-mono
cable
RCA-to-RCA
cable
Coaxial Digital Out
CD or DVD player
9