Aigostar 330200JRI Manual De Instrucciones página 10

GB
（ 3 ） As in fig.16, rotate the HEPA
cover to separate it from the
chamber cover
（ 5 ) As in fig.18, If you have any hair
winding removable cleaning.
（ 7 ） Wash the HEPA cover, the HEPA assembly, the outlet sponge and the dust
chamber in the water without detergent and dry them before use.
（ 8 ） Fix the HEPA assembly on the chamber cover and make sure three salient
cubes should be stuck in the grooves of the dust chamber.
（ 9 ） Rotate the HEPA assembly in the direction of the mark on the chamber
cover.
（10） Assemble the chamber cover assembly and the dust chamber according to
the mark outside.
Fig.16
（ 4 ） As in fig.17, get the HEPA
cover
Fig.19
Fig.18
（ 6 ） As in fig.19, get the HEPA and
wash it.
GB-07
Fig.17