How To Use - Aigostar 330200JRI Manual De Instrucciones

GB
Model No.
SPECIFICATIONS
Model No.
Voltage
Voltage
Frequency
Frequency
Power
Power

HOW TO USE

ASSEMBLY BEFORE USE
Fig.1 shows the connection of the hose
and the vacuum cleaner:
Put the hose connector in front of
the vacuum cleaner .Then insert it
into the inlet hole and turn right. If
you want to disassemble it, you can
turn the hose connection left and
then pull it out.
Fig.2 shows the connection of the hose
and the extending metal tube:
Hold the flexural connector of the
hose and put it into the bigger hole
of the tube.
Fig.3 shows the connection of the tube
and the brush tool:
Put the metal tube into the hole of
the brush and rotate it to fasten
them.
330200JRI / 330200ICP
220-240V ~
50/60Hz
700W
Fig.3
GB-03
Fig.1
Fig.2