Oase biOrb EARTH Manual De Instrucciones página 12

1 Side cover (wing) with food opening and carbon filter (outgoing air)
2 Centre cover with 4 lights
• When the cover is removed or tilted, the lights are switched off.
• The lights alternate between becoming dimmer and brighter if the biOrb EARTH has no water for
48 hours.
3 Foam mat
• Stores moisture from rain or mist, thereby replicating soil moisture.
4 Capillary mat
• Transports moisture from the foam mat into the substrate with the plant roots located above it.
• Prevents roots from entering the foam mat.
5 Polystyrene base with heating cables (floor heating)
6 Drain with drain hose
• For emptying water from the unit.
7 Filling port, liquid reservoir for rain and mist
• We recommend biOrb Humidimist as rain and mist fluid.
• Do not fill with tap water, as limescale will damage the acrylic glass.
8 Funnel for filling the liquid reservoir
9 Carbon filter in the rear section (fresh air)
10 Speaker
11 Outlet air Peltier element
12 Inlet air Peltier element
13 Inlet opening for the circulating air cooled or heated by the Peltier element
14 Extraction opening of the air circulation system
15 Button with LED.
• Functions (see following section).
• To press the button, remove the grating of the inlet air opening (11).
16 Rain nozzle
17 Temperature and humidity sensor
• The "OASE Control" app shows the current sensor values. Due to the air circulation, different val-
ues may be measured at a different location.
18 Mist outlet and inlet opening for fresh air
19 Power pack
20 Power cable with country-specific power plug
21 Rubber stopper
• For sealing the housing openings when the rear section containing the electronics is removed.
12