Chapter 6: Assembly For Transport And Access Through Doors; Chapter 7: Verification, Upkeep And Maintenance - TUBESCA-COMABI GENERIS 300 Manual Del Usuario

Chapter 6:
The GENERIS 300 mobile scaffolding fits through a door with a minimum width of 0.68m and a minimum
height clearance of 1.91m.
The scaffolding can also be used to transport equipment and small tools.
To extend the life of your scaffolding, it is recommended to store it away from bad weather.
Chapter 7:
CHECKS:
Inspect parts before each assembly, particularly:
- castor wheels tyres and brakes,
- safety devices (split pin, adaptor, etc.),
- working platform hooks and fasteners.
- the plywood on the working platforms.
- the stabiliser mounting brackets.
- the welds on the ladder rungs.
All parts with the following defects:
- permanent deformation.
- perforations.
- score marks (as a result of grinding, for example...)
- severe oxidation
- weld failure starting out,
... should be discarded!
If in doubt, change the part.
Cf.: Check sheet available on:
106-A000035744 - ind.0 – 11/2021
Assembly for transport and access through doors
Verification, upkeep and maintenance
https://www.tubesca-comabi.com/fr/centre-de-documentation
54