Trust ALKCT-2000 Manual Del Usuario página 10

ALKCT-2000 ARM/DISARM REMOTE CONTROL
EN
8. Confirm unpairing
After entering pairing mode press the OFF button shortly to unpair with the Siren. The LED indicator of
the Siren and ALKCT will be flashing 5 times to confirm that the unpairing has been done successfully.
9. Delete ALKCT memory
To delete the memory of the ALKCT press the ON and OFF button simultaneously for 4 seconds (untill
the LED starts to blink) Release the buttons and press the ON and OFF buttons simultaneously again
for 4 seconds. (untill the LED starts to blink fast). Press the OFF button shortly to delete the memory of
the ALKCT. The LED will blink 5x to confirm the memory has been deleted.
10. Mounting the holder
Mount the holder of the ALKCT on a flat surface and secure it with screws. (Mounting screws not
included)
11. Place ALKCT in holder
When the holder has been mounted and secured with screws place the ALKCT in the holder. To place
the ALKCT slide it in from top to bottom.
2