Jacuzzi MELBA 48 Manual De Instrucciones página 11

1. Place the wall tracks (E) on their positions and mark the holes.
2. Remove the wall tracks and drill guide holes with a ø8mm (5/16in) drill bit.
3-4. Insert the wall anchors (AA) into the wall. Replace and secure the tracks (E) with screws (BB). Do not
overtighten.
1
E
3
AA
WALL TRACK INSTALLATION
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
11
2
ø8 mm
5/16 in
4
E
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
BB