3.75G/Hspa Module; Usim Card Insertion - AIRIS Praxis N1204 Manual Del Usuario

3.75G/HSPA Module

(Models A & B Only)
If you have included an optional 3.75G/HSPA module in
your purchase option, follow the instructions below to in-
stall the USIM card (which will be provided by your ser-
vice provider), and then run the appropriate application
supplied with your module.

USIM Card Insertion

1. Turn off the computer, and turn it over and remove the battery
1 (slide the latches in the direction indicated below and slide
the battery out).
2. Locate the SIM card cover and loosen screw
3
the SIM card cover .
1
3
Figure 9 - Battery & SIM Card Cover Removal
18
All manuals and user guides at all-guides.com
3. Insert the USIM card as you would into your mobile phone.
4. Slide the SIMLOCK towards the hinge (in the direction to the
5. Insert the USIM card and close the SIMLOCK.
2
and remove
6. Lock the SIMLOCK by pushing it in the direction of the arrow in
2
7. Replace the cover, screw and battery.
arrow illustrated in Figure 10) in order to release the lock and
lift it up.
Figure 10 - Unlock the SIMLOCK
Figure 11 until it clicks into the lock position.
Figure 11 - Lock the SIMLOCK