Repeater Function (Stand-Alone) - Alpha IP PS 21001 Manual De Instrucciones

Alpha IP PS/PSM 21001
26
Commissioning
5.2

Repeater function (stand-alone)

The pluggable switch PS 21001 can be used for the stand-alone solution
of the Alpha IP base station (FAL) as a common repeater. The integration
as a repeater into the system is performed as follows:
1. Connect the device to a fixed wall power socket. The teach-in mode
is automatically activated for three minutes.
2. Press the system key (see „Device overview" page 23) at the Alpha
IP base station until the system LED flashes.
3. Press the system key pluggable switch / pluggable switch and meter
until the system LED flashes.
9 The repeater function is active. The teach-in mode is active. The LEDs
of both devices light up.
DEU ENG FRA
FIN SWE POL
NDL ITA ESP
RUS
DAN/NOR