Resetting Factory Settings - Alpha IP PS 21001 Manual De Instrucciones

Alpha IP PS/PSM 21001
31

Resetting factory settings

10 Resetting factory settings
All settings will be lost when the factory settings are restored.
1. All settings will be lost when the factory settings are restored.
2. Remove the device from the wall power outlet.
3. Plug the device into a fixed wall power outlet. Simultaneously, press
and hold the system key (see „Device overview" page 23) for 4
seconds until the LED flashes rapidly in orange.
4. Release the system key.
5. Press the system key again for 4 seconds until the LED lights up in
green.
6. Release the system key again.
9 The device restarts.
9 The factory settings are reset.
DEU ENG FRA
FIN SWE POL
NDL ITA ESP
RUS
DAN/NOR