Pausing Cd Playback; Selecting The Search Method; Searching Every 10 Tracks In The Current Disc; Using Compression And Bmx - Pioneer SUPER TUNER III D DEH-3770MP Manual De Operación

Section
05 Built-in CD Player
1 Press 3 to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.
2 When you find the desired track press 3
to turn scan play off.
# After scanning of a CD is finished, normal
playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
% Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis-
play.
# You can also turn pause on or off by pressing
PAUSE.

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
% Press 2 to select the search method.
Press 2 until the desired search method ap-
pears in the display.
! FF/REV  Fast forward and reverse
! ROUGH  Searching every 10 tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
12
En
All manuals and user guides at all-guides.com
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on this
page.
2 Press and hold c or d to search every
10 tracks on a disc.
# If a disc contains less than 10 tracks, pressing
and holding d recalls the last track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding d recalls the last track of the
disc.
# If a disc contains less than 10 tracks, pressing
and holding c recalls the first track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding c recalls the first track of the
disc.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
% Press 1 to select your favorite setting.
Press 1 repeatedly to switch between the fol-
lowing settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2