Using The Sound Field Control; Using The Position Selector - Pioneer AXM-P7050 Manual De Operación

Section
07
Digital Signal Processor
SP Set (speaker setting)CutOff (cut-off fre-
quency)SP Lev (speaker output level)
T Tone (test tone)Time A (time align-
ment)PEQ (3-band parametric equalizer)
# When neither F/L nor F/R is selected in Posi,
you cannot switch to Time A.
# When neither CUSTOM1 nor CUSTOM2 is se-
lected as an equalizer curve, you cannot switch
to PEQ.
# To return to the display of each source, press
BAND.

Using the sound field control

The SFC function creates the sensation of a
live performance.
! The acoustics of different performance en-
vironments are not the same and depend
on the extent and contour of space through
which sound waves move and on how
sounds bounce off the stage, walls, floors
and ceilings. At a live performance you
hear music in three stages: direct sound,
early reflections, and late reflections, or re-
verberations. Those factors are programed
into the SFC circuitry to recreate the acous-
tics of various performance settings.
% Press SFC to select the desired SFC
mode.
Press SFC repeatedly to switch between the
following mode:
Musical (musical)Drama (drama)Action
(action)Jazz (jazz)Hall (hall)Club (club)
OFF (off)
Note
If the source is a 2-channel LPCM audio or a 2-
channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e., Musical, Drama or Action), we re-
commend turning Dolby Pro Logic on. On the
20
En
All manuals and user guides at all-guides.com
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e., Jazz,
Hall or Club), we recommend turning Dolby Pro
Logic off.

Using the position selector

One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Press p to select Posi.
Press p until Posi appears in the display.
2 Press m/n/r/q to select a listen-
ing position.
Press one of these, m/n/r/q, to select
a listening position as listed in the table.
Button Display
m F/L
n F/R
r FRONT
q ALL
# To cancel the selected listening position,
press the same button again.
Note
When you make adjustments for listening posi-
tion, the speakers are automatically set for appro-
priate output levels. You can tailor them if you
want as discussed under the heading of Adjust-
ing the speaker output levels using a test tone or
Adjusting the speaker output levels.
Position
Front seat left
Front seat right
Front seats
All seats