Introduction Of Advanced Multi-Cd Player Operation; Repeating Play; Playing Tracks In A Random Order - Pioneer AXM-P7050 Manual De Operación

Section
06
Multi-CD Player
Introduction of advanced
multi-CD player operation
1 Function display
Shows the function status.
Important
You can use the following functions only when
the remote control is set to DEQ mode.
% Press o to display the function
names.
Press o repeatedly to switch between the
following functions:
Repeat (repeat play)Disc title listRandom
(random play)Scan (scan play)ITS Play
(ITS play)Pause (pause)Comp (compres-
sion and DBE)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.

Repeating play

There are three repeat play ranges for the
multi-CD player: MCD (multi-CD player re-
peat), TRK (one-track repeat) and DISC (disc
repeat).
1 Press o to select Repeat.
Press o until Repeat appears in the display.
14
En
All manuals and user guides at all-guides.com
1
2 Press m or n to select the repeat
range.
Press m or n until the desired repeat
range appears in the display.
! MCD  Repeat all discs in the multi-CD
player
! TRK  Repeat just the current track
! DISC  Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRK, the repeat play range
changes to DISC.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, MCD
and DISC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press o to select Random.
Press o until Random appears in the dis-
play.
3 Press r to turn random play on.
Random :ON appears in the display. Tracks
will play in a random order within the pre-
viously selected MCD or DISC ranges.
4 Press q to turn random play off.
Random :OFF appears in the display. Tracks
will continue to play in order.