English
Check that all the safety devices are installed and are
in good condition.
Remember that the machine operator is responsible
for the dangerous situations and accidents caused
to other people or things. The manufacturer shall not
be in any case responsible for damages caused by
improper or incorrect use of this machine.
Do not force this machine. Use this machine for the
correct application. Using the machine for the type of
work intended will allow you to work better and safer.
Do not use this machine if the switch does not change
between "open" and "closed". Any machine that
cannot be controlled with the switch is dangerous and
must be repaired.
Turn off the machine, and disconnect the
spark plug before performing any adjustment,
fill with fuel, change any accessories,
cleaning, transportation and storage of this
machine. Such preventive safety measures reduce the
risk of accidentally starting this machine.
If the machine vibrates abnormally stop the engine,
inspect the machine looking for the possible cause
and repair. If you cannot find the reason take the
machine to a service technician. Vibrations are always
an indication of a problem with the machine.
Reduce the system of rotation of the motor when you
turn off the engine if the engine is equipped with a
fuel valve, cut the fuel when the engine has stopped.
Do not tilt the machine with the engine running.
2.7. SERVICE
Please periodically service your machine with
a qualified repair center using only identical
replacement parts. This will ensure that the safety of
this machine is maintained.
2.8. RESIDUAL RISK FACTORS
Even when using the tool in the prescribed manner
it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with
the construction and the design of the tool:
WARNING! This machine produces an electromagnetic
field during operation. This field may, in some
circumstances, interfere with implants medical assets
or liabilities. To reduce the risk of death, or serious
injury people with medical implants should consult
their physicians and the manufacturer of the implant
before using this machine.
26/108