Calypso Watches IKMV-001 Manual De Instrucciones página 5

I
ENGLISH INSTRUCTION MANUAL
HOW TO USE TIMER
From the normal time display, press 53 three times to enter. To set countdown timer:
• Press S2-hours will flash-advance by pressing S 1
• Press S3-minutes will flash-advance by pressing S 1
• Press S3 again-seconds will flash-advance by pressing S1
• Press S2 to stop setting
• Press S1 to start countdown timer. Press S1 again to stop the countdown timer. While the
timer is running, press S2 to reset the countdown time to its starting value.
Within the setting time 3 minutes, there is an alarm (BI-BI) when the seconds digit is "O" or "30".
Within the setting 10 seconds, there is an alarm (BI) per second.
When timer expired, the alarm (BI-BI-BI) lasting 10 seconds, it will be silenced by press S1,
S2 or S3. Press S3 to return to normal time display.
Buzzer will sound the functions of TIMER and ALARM in sequence when they occur at the
same time
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making
products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other
authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and
protecting our health.
IKMV-001
CARE OF YOUR WATCH
1. This watch contains electronic components. Never attempt to open the case or remove the
back cover.
2. Do not operate push buttons below the surface of the water while swimmingor diving.
3. Should water or condensation appear in the water, have the water checked immediately.
Corrosion of electronic parts can occur inside the case.
4. Avoid severe impact. The watch is designed to withstand impact under normal use. It is
inadvisable to subject it to severe impact or rough usage.
5. Avoid exposing the watch to extreme temperature.
6. Clean the watch with soft cloth and clean water only. Avoid using chemicals.
7. Keep your watch away from the conditions of strong electricfield and static electricity.