Important Safeguards - Hydrofarm Active Air ACFW16HDB Manual De Instrucciones

Thank you for purchasing the Active Air 16" Commercial Wall Mount Fan. Each unit has been
manufactured to ensure safety, reliability, and easy of use. Before use, please read these instructions
carefully and save them for future reference.
INSPECTING YOUR WALL MOUNT FAN
Before first use, please follow these instructions:
• Remove all packing and any labels.
• Inspect the fan to make sure that it is in good condition. It must have no cracks on the unit and
no damage to the cord/plug.

IMPORTANT SAFEGUARDS

When using your commercial Wall Mount Fan, basic precautions should always be followed, including
the following:
• Do not leave the fan unattended while operating.
• This fan is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning its use of the by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not allow the cord to touch hot surfaces and do not place cord on or near a hot gas or electric
burner.
• Never use this wall mount fan near bathtubs, showers, basins, or other vessels containing water.
• Never immerse the wall mount fan, plug, or cord in water, nor allow any liquid to come in to
contact with any part of the wall mount fan.
• Make sure that your local power's voltage is consistent with the voltage indicated on the fan's
rating label.
• Never touch the blades with your hand or any other object.
• Do not pull the cord too tight. If it becomes damaged after prolonged use, get it repaired by a
technician.
• Never insert your fingers, pencils, or other objects through the wall mount fan grille during
operation.
• The wall mount fan should only be used on a stable, vertical wall surface.
• Do not operate the fan without the guards being properly in place and secured.
• Do not expose the wall mount fan to excessive heat or humidity. This could cause damage to the
electrical components.
• Check the power cord and plug regularly for any damage. If the cord or the plug is damaged, it
must be replaced by a qualified person in order to avoid an electrical hazard.
• We do not recommend the use of an extension cord. It could overheat and cause a fire hazard.
• This appliance is intended for indoor use only. Industrial or commercial use will void the
warranty, and neither the manufacturer nor the dealer can be held responsible for injury or
damage caused by using the appliance for any other purpose than that intended.
• To reduce the risk of fire or electric shock, do not use this fan with any speed control device.
• To disconnect the fan from power, grip the plug and pull it from wall outlet. Never pull on the
cord to unplug the fan.
• The use of any accessories or attachments that are not recommended or supplied by the
manufacturer may result in injuries, fire or electric shock.
www.Hydrofarm.com
2
INSTRUCTIONS