Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Weight
EnGLIsH
Cat #
DCB546
DCB547
DCB181
DCB182
DCB183/B
DCB184/B
DCB185
DCB187
EC-Declaration of Conformity
Machinery Directive
Tool Connect™ Cordless Drill/Driver/
Hammerdrill
DCD992, DCD997
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010,
EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU,
2011/65/EU and 2014/53/EU. For more information, please
contact D
WALT at the following address or refer to the back of
e
the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D
WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
23.03.2016
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
30
Batteries
V
Ah
Weight (kg) DCB107
DC
18/54
6.0/2.0
1.05
18/54
9.0/3.0
1.25
18
1.5
0.35
18
4.0
0.61
18
2.0
0.40
18
5.0
0.62
18
1.3
0.35
18
3.0
0.48
WALT.
e
Chargers/Charge Times (Minutes)
DCB113
DCB115
DCB118
270
140
90
60
420
220
140
85
70
35
22
22
185
100
60
60
90
50
30
30
240
120
75
75
60
30
22
22
140
70
45
45
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
DCB132
DCB119
90
X
140
X
22
45
60
120
30
60
75
150
22
X
45
90
Publicidad
Tabla de contenido
