TFA_No. 60.2001 Anleitung
Multi-functional alarm clock
• The alarm is activated.
• To deactivate or activate the alarm function
press "UP" button.
• Press "MODE" button four times to return to
normal mode.
• When alarm is sounding, press any button to
stop the alarm.
3.3 Timer
3.3.1 Stopwatch
• Press "MODE" button two times in normal
mode.
• TIMER appears in the display and TIMER-symbol
(down).
• Press "UP" or "DOWN" button to start the
count up process.
• Use "UP" or "DOWN" button to stop and
restart.
• Press "SET" button to reset the timer.
3.3.2 Count Down Timer
• Press "MODE" button again.
• TIMER appears in the display and TIMER-sym-
bol (above).
16
10.03.2009
16:06 Uhr
Multi-functional alarm clock
• Press "SET" button to make the desired set-
• Hold and press "UP" or "DOWN" button for a
• Confirm with "SET" button.
• Press "UP" or "DOWN" button to start the
• Use "UP" or "DOWN" button to stop and
• Press "SET" button to clear the count process.
• The hour digits are flashing and you can make
• When the timer counts down to 0:00, a beep-
• Press "MODE" button two times to return to
• The timer will also operate if switching to
• The TIMER symbol flashes on the LCD.
Seite 9
tings The setting sequence is shown as follow:
Hours and minutes. Adjust with "UP" or
"DOWN" button.
fast count.
count up process.
restart.
a new setting.
ing alarm (1 min.) will sound and the display
will change automatically in timer mode. To
turn off the alarm, press any button.
normal mode.
another display mode.
17