Setting Talking Feature - Medline MDS4001 Manual Del Usuario

SETTING TALKING FEATURE

The MDS4001LAT Talking Model can be set to announce your measurement results, according to the
following method:
NOTE: The MDS4001LAT has a gray faceplate. If your device does not have a gray faceplate, the following
instructions are not relevant for your device.
1.When the display is off, hold the SET button for about 5 seconds, or until the year in the upper right
corner begins to flash.
2.Press the SET button again to move through the date and time settings, until SP in the lower left corner
begins to flash.
3.Press the MEM (Memory) button to switch between languages: SP 01 is English, SP 02 is Spanish, and
SP OF is off.
4.Press the SET button again to confirm the language selected and return the device to the initial
display off screen.
17