Black and Decker BDGS36 Manual De Instrucciones página 12

ENGLISH
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
After use, carefully clean the blades. After cleaning, apply
u
a film of light machine oil to prevent the blades from
rusting.
Storage
When the tool will not be used for several months, ideally
leave the battery connected to the charger. Otherwise proceed
as follows:
Fully charge the battery.
u
Store the tool in a secure and dry location. The storage
u
temperature must always remain in the range of +10 °C to
+40 °C.
Before using the tool after prolonged storage, fully charge
u
the battery again.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
V
Blade strokes (no load) min
Blade length (shear) cm
Blade gap (shear) mm
Weight kg
Charger
Input voltage
Output voltage
Current
Approx. charging time
Weight
12
(Original instructions)
BDGS36 (H1)
DC
-1
905450xx
V
AC
V
DC
mA
h
kg
Level of sound pressure according to EN 50636:
Emission sound pressure level (L
Sound power level (L
WA
Vibration total values (triax vector sum) according to EN 50636:
(a ) 2.5 m/s , uncertainty (K) 1.5 m/s
2
h
OUTDOOR NOISE DIRECTIVE
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN 60335-1:2012 + A11:2014 + A13:2017;
2000/14/EC, Shear, Annex V
DEKRA Certification B.V. Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM, Netherlands
Notified Body ID No.: 0344
Level of acoustic power according to (5) 2000/14/EC
L (measured emission sound pressure level) 80.5 dB(A)
PA
L (guaranteed sound power) 87 dB(A)
WA
These products also comply with Directive
2006/42/EC, 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
3.6
file and makes this declaration on behalf of Black & Decker.
850
10
23
0.65
Black & Decker Europe, 270 Bath Road, Slough,
230
9
100
19
0.15
) 80.5 dB(A), uncertainty (K) 2.6 dB(A)
pA
) 84 dB(A), uncertainty (K) 2.1 dB(A)
2
MACHINERY DIRECTIVE
%
BDGS36 - Shear
EN 50636-2-94:2014
(Article 13):
Director – Outdoor Products Group
Berkshire, SL1 4DX
Becky Cotsworth
United Kingdom
17/09/2019