Tabla de contenido
Publicidad
MENU SEQUENCE
Each time you press the MENU button you will
move to the next item in the table below. Use the
UP/DOWN buttons to adjust the value. Changes
are saved automatically.
Mode
DMX Address Selection
DMX Channel mode
Auto mode
Sound Mode
Sound Sensitivity
Slave mode
DMX ADDRESS SELECTION
Press the MENU button repeatedly, until the display
shows the current DMX address e.g.
UP/DOWN button to adjust the DMX start address
to the desired value in the range 1 to 512. The
number of channels occupied by the light is set in
the next parameter.
DMX CHANNEL MODE
Press the MENU button repeatedly, until the display
shows
. Press the ENTER button. The display
will change to show the current DMX channel mode
e.g.
. Each time you press the UP/DOWN
button, the channel mode alternates between 3
channels and 12 channels.
Display Text
to
to
to
to
. Use the
Auto mode has two adjustable parameters: Each
time you press the ENTER button the display
alternates between the two parameters. The fi rst
parameter selects the function and has a range
from At01 to At09. The second parameter sets the
speed from S.01 to S.32.
Additional Settings
(press enter)
to
to
AUTO MODE
Press the MENU button repeatedly, until the display
shows the current auto function in the range
to
. Use the UP/DOWN buttons to select a
different auto function if desired.
To adjust the speed of the current auto function,
press ENTER. The display will change to show the
current speed in the range
UP/DOWN buttons to adjust the speed if required.
SOUND MODE
Press the MENU button repeatedly, until the display
shows the current sound function in the range
to
. Use the UP/DOWN buttons to select a
different sound function if desired. Sound sensitivity
is adjusted in the next parameter.
9
Adjustment
(press up/down buttons)
Change the starting
DMX channel for this
light
Select 3-channel mode
or 12-channel mode for
DMX operation
Select the auto function
1-9. Press ENTER
to swap to speed
adjustment, then use
Up/Down buttons to
adjust the speed from 1
to 32.
Select one of the
three available sound
functions.
Adjust the sound
sensitivity from 1 (least
sensitive) to 9 (most
sensitive).
to
. Use the
Publicidad
Tabla de contenido
