Technical Data; Definitions: Safety Guidelines; English (Original Instructions) - DeWalt DCMPH566 Traducido De Las Instrucciones Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
18V POLE HEDGE TRIMMER
DCMPH566
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Battery type
SPM
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-1
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or noise
emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
18V Pole Hedge Trimmer
DCMPH566
WALT declares that these products described under Technical
D
e
Data are in compliance with:
2006/42/EC, EN60745-1 :2010, ISO 10517 :2019.
WALT one of the
e
DCMPH566
V
18
DC
Li-Ion
2800
kg
3,6
dB(A)
81,6
dB(A)
93
dB(A)
1,2
2
m/s
2,5
2
m/s
1,5
2000/14/EC, Annex V
DEKRA Certification B.V.
Meander 1051 / P.O. box 5185
6525 MJ ARNHEM / 6802 ED
ARNHEM, Netherlands
LPA (measured sound pressure) 81,6 dB(A)
uncertainty (K) = 3,0 dB (A)
LWA (guaranteed sound power) 95 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europe
D
WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
21.10.2019
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
EnGLIsH
WALT at
e
WALT.
e
29

Publicidad

Tabla de contenido
loading

Tabla de contenido