Selecting A Location - STACK-ON QAS-1845-E Manual Del Usuario

SELECTING A LOCATION

The safe must be mounted to a shelf or floor.
For optimal safety and security, the safe should
be installed in an isolated, dry and secure area.
THE SAFE SHOULD ALWAYS BE KEPT OUT
OF THE REACH OF CHILDREN.
SECURING THE SAFE
NOTE: This safe must be mounted to a shelf
or floor. Failure to do so will compromise the
safety and security of the safe.
NOTE ON LOCKING THE SAFE: The safe needs to
be in an upright position, as shown in figure 1,
for the locking mechanism to function properly.
Failure to mount the safe in the corrrect
upright position will compromise the safety
and security of the safe.
FIGURE 1
Secure the safe to a shelf or floor using the
predrilled mounting holes in the safe and
hardware provided.
Place the safe in the desired location and mark
the mounting holes to be used with a pencil.
Move the safe and drill the pilot holes for the
screws. For mounting to a shelf, drill 3/16"
diameter pilot holes and attach the safe using
the 3/4" screws and washers. (Figure 2)
FIGURE 2
IMPORTANT
Keep keys and your combination number in a
secure place, away from children. Keep this
record of your serial number and combination
in a secure place separate from your safe. To
order a replacement key set, follow the
instructions on the attached form.
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
© 2018 STACK-ON PRODUCTS
4
12
40786-1803