Analog Audio Setup - Mad Catz WARHEAD 7.1 Manual Del Usuario

Charge the battery and insert it into the Headset. See page 7 for more information.
1
Plug the 3.5mm stereo audio connector of the RCA Adapter Cable into the Line In input of
2
the Base Station.
Connect the Red/White RCA cables from the RCA Adapter Cable to the Red/White RCA
3
cables on the Component/VGA/Composite AV cable. Optional: Connect the male ends of
these cables to the RCA audio inputs on the display.
Connect Power Adapter to Base Station. Plug Power Adapter into wall outlet.
4
Power ON the Xbox 360 Console and Headset.
5
To confirm Xbox LIVE settings, press the "Xbox Guide Button" when a game is loaded, and
6
go to Personal Settings > Voice. Ensure that "Headset Only" is selected.
Press the connect button on the Xbox 360. Press and hold the connect button on the
7
headset for 3 seconds.
Match the Base Station quadrant to the controller by pressing the Connect button.
8
See page 18 for more information.
Press the Input button on the Headset to select the analog input. The "Digital" LED on the
9
Base Station will turn OFF when the analog input is selected.
®
TRITTONUSA

analog audIo setuP

[14]
4
3