Power Save Mode; Wireless Range; Syncing Headset To Base Station - Mad Catz WARHEAD 7.1 Manual Del Usuario

If the Headset receives no audio for 15 minutes, the Headset will power down to save
battery power. Press the Power/Sync button to turn the Headset back ON.
The Warhead 7.1 Headset transmits audio via digital radio frequency (RF) and has an
operating range of 33 feet/10 meters in any direction. Please remain within this range for
optimal performance. Avoid placing the Base Station on top of a metal surface or behind
other devices that use RF. If the Headset is not operating properly within the 33-foot/10-
meter range, try moving the Base Station to a different location for improved performance.
syncIng headsets to base statIon
Note: Headsets are paired to the Base Station at the factory. This step is only
necessary when Syncing a new Headset.
With the Base Station powered ON, press and hold the Power/Sync button on the Base
1
Station for 2 seconds. The Power/Sync LED on the Base Station will flash slowly.
On the Headset, quickly press and hold the Power/Sync button for 5 seconds. The
2
Headset and Base Station will Sync, and the LED on the Base Station will illuminate solid
when the Syncing is successful.
®
®
TRITTONUSA
TRITTONUSA

PoWer save Mode

WIreless range

33ft/10m
[15]