E - Operation; Operating Principle; On-Screen Symbols - THOMSON 512166 Manual De Instrucciones

E - OpErATiON

1 - OPERATING PRINCIPLE

The intercom panel can be powered either by 6 LR06 batteries or by a 12V mains adapter (included) which
will allow you to:
• Control the opening of an electric strike plate (not included)
• Use a "spy" mode, in which you can view the video without having received a call from a visitor.
12V adapter
(optional)
Motorised gate
(optional)
• When the name holder on the intercom panel is pressed, the ringer on the monitor will sound 3 times.
• After 3 rings, you can talk to your visitor using the
warning:
The key must be held down for the visitor to hear you. You must release this
key to hear your visitor's response.
• Release this key to hear your visitor's response.
• The conversation will end automatically after 60 seconds if the intercom panel is powered by batteries.
2 - ON SCREEN SYMBOLS
1
2 X
16
EN
Signal quality indicator: depending on the distance between the intercom panel and
the
monitor.
Battery indicator
At the bottom of the screen for the monitor
At the top of the screen for the intercom panel
Full-screen mode
QUAD mode: All active channels are visible.
SCAN mode: The monitor scans all the active channels.
Zoom x2
Wireless colour Video intercom With
Video surVeillance option
Electric strike
plate (optional)
key.
/
dc 5V