Drilling Workbench Position Adjustment; Drilling Workbench Alignment Adjustment; Chuck Removal; Stop Cycle - Femi job Line DP 12-942 PRO DISPLAY Manual Del Usuario

9.2.4. Drilling workbench position
adjustment
1. Loosen lever (B) and turn handle (A) to
transfer the drilling workbench vertically
along the column.
2. On completion, tighten lever (B) completely.
B
9.2.5. Drilling workbench alignment
adjustment
INSTRUCTION MANUAL - TRANSLATION OF ORIGINAL INSTRUCTIONS
9.2.6.

Chuck removal

Grooves
Rack
(teeth)
A

9.3. Stop cycle

1. To stop the work cycle, press the OFF button.

9.4. Switching off

1. Stop the work cycle.
2. Disconnect the plug from the wall socket.
Shaft
Cleaver wedge
Shaft
18
Chuck
English ▪ 29