LIMIT 96 Manual Del Usuario página 6

Display symbol
GB
Operations:
1. Power On and Off
1.1 Press the measurement trigger (Pos.7) to turn on the thermometer, LCD screen (Pos. 3) and backlight
will turn on.
1.2 The thermometer will turn off automatically if there is no operation in 8 s.
2. Manual measurement
2.1 Aim at the target then press and hold the trigger. SCAN icon will indicate the targets temperature is
being measured.
2.2 Release trigger and the SCAN icon will disappear, and HOLD icon appear indicating that the measuring
has stopped, and the last value will be saved in the display.
3. Laser beam setup
Press Up/ Laser key (Pos.5) to turn ON or OFF the laser beams. When
you can measure without laser beam.
4. Functions setup
4.1 Press MODE key (Pos.6) to choose between functions and values.
4.2 Press UP or DOWN key (Pos. 4 & 5) to turn ON/OFF or change value.
Note: Instrument will exit setup after 5 seconds if there are no operations.
Temperature measuring
Measurement data locked
Laser ON
Trigger free measuring
High alarm
Low alarm
Main display value
Temperature in Celsius
Temperature in Fahrenheit
Low battery
Selected function
Max/Min readout
Emissivity factor
2
English
icon disappear from the display