Echo 99944200250 Instrucciones página 3

5. Place ends of line into notches (F) in spool, leaving 6 in. protruding.
6. Thread line ends through housing eyelets (G) and place spool in
housing against spring.
7. Align cover tabs with tab holes in housing and push cover on until tabs
snap-lock into place.
8. Hold spool and drum securely with one hand, and pull each line to
disengage from notches.
9. Trim lines to 8 in. length.
NYLON LINE HEAD INSTRUCTIONS
F
G
3
F
G