Overview Bridge; Compatible Mobile Platforms - Luvion Wifi Bridge Manual De Instrucciones

22

OvERviEW BRidgE

1. Connector for the Supreme Connect monitor. Place
your monitor on this connector to charge and connect
with internet.
2. Service Switch. Please make sure the switch is reading
'INTERNET' . The 'DIRECT' mode is for service purposes
only.
3. Ethernet port. Connector for the ethernet cable.
4. Power Connector for the included Luvion adapter (5V)
5. Reset button, hold this button for 5 seconds in case
you've changed and lost the password of your WiFi
Bridge. Please be advised that after a reset, the WiFi
Bridge requires a full reinstallation to your router.
6. QR Code, to be scanned during install.
7. UID, in case the QR code does not work during the
installation, this unique code can be entered manually.

COMPaTiBlE MOBilE PlaTfORMS

the luvion app supports the following platforms:
iPhone/iPad ios 5.1 and above
Android 2.2 and above
NOTE: Luvion recommends a minimum upload speed of 512Kbps
An upload speed of 1Mbps or higher is recommended for best performance.
NOTE : Up to 3 users can be connected to the bridge at the same time.
1
2 3 4 5
6 7