Luvion Wifi Bridge Manual De Instrucciones página 24

24
3. place the monitor onto the power/network connector on the bridge. use the stand-up guides to help place
the monitor. the monitor will charge when connected to the bridge. It takes 5 hours to fully charge a battery.
on your smartphone or tablet, download our luvion app for free from the app store (iphone®) or the google
play store (android™).
iPHONE ETHERNET SETUP
complete chapter 'getting started' and launch the luvion app.
1
Go to 'Add Device'- enter the uId code for the bridge in
2
one of the following ways:
Option A: tap Qrcode and scan the Qr code (the black and
white square found on the side of the bridge).
Option B: tap add and manually enter the uId printed below
the Qr code on the side of the bridge. you may need to do this
if your device does not have a camera.
Option C: If your device is on the same network as
the bridge, it will automatically detect the bridge uId. tap the uId to
enter.