Technical Specifications; Troubleshooting - Luvion Wifi Bridge Manual De Instrucciones

36

TECHNiCal SPECifiCaTiONS

Technical Specifications
ethernet
dhcp
Mobile apps
adapter
operation temperature

TROUBlESHOOTiNg

Problem
cannot connect to the monitor on
my smartphone or tablet
I have forgotten the password to
the bridge
I do not see live Video controls on
the screen in the iphone®/ipad® app
10 / 100 M ethernet port
dhcp client / server
ios (5.1+) / android (2.2+)
5V dc 1.5a
0 - 40 c / 32 - 104 f
solution
•
Monitor is not placed on the bridge. the monitor must be
on the bridge to enable remote connectivity.
•
Make sure the bridge is connected to power using the
bridge power adapter. the bridgecannot use the power
adapter for the monitor or cameras.
•
ethernet cable not connected. connect an ethernet
cable to the bridge and connect the other end to your
router. for details, see "iphone®/ipad® ethernet setup"
or"android ethernet setup"
•
ensure the switch on the back of the bridge is set to
Internet mode. dIrect mode is for service use only. dis-
connect and reconnect the power adapter after switching
to Internet mode.
•
press and hold the reset button on the bridge with a
paper clip or other thin object for 5 seconds to reset the
bridge to the default password, 000000. you will need
to re-enter your wi-fi network in the bridge, as this will
cause the bridge to forget any configured wi-fi networks.
•
controls are only shown when the device is held in
portrait mode.