GE JKS10 Instrucciones De Instalación página 5

Installation Instructions
Cutout for 27"
A
Ovens only
For JKP35, JKP55, JKP75, PK956, ZEK958 models only.
Cabinet
(68.6 cm)
25" (63.5 cm) Min.
(64.1 cm) Max.
Allow 1" (2.5 cm)
for overlap of
oven over side
edges of cutout
2" x 4"
(5 cm x 10 cm)
or equivalent
runners
20" (50.8 cm)
Allow 1"
(2.5 cm) for
Allow a minimum
overlap of oven
of 20" (50.8 cm)
top and bottom
for clearance to
of cutout
adjacent corners,
drawers, walls, etc.
when door is open
If the cabinet does not have a solid bottom,
two braces or runners must be installed to
support the weight of the oven. For double
ovens, the runners and braces must
support 300 lbs (135 Kg).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
(68.6 cm)
5"
(12.7 cm)
Max. from
the left or
right
Width
side
27"
Cutout
Width
25 1/4"
Cutout
Height
49 11/16"
(126.2 cm) Min.
50 1/8"
(127.3 cm) Max.
Recommended
cutout location
from floor 13 1/4"
(33.7 cm)
Double Built-In
Cabinet Width
Recommended
Cutout Location
from Floor
Junction Box
Location
Cutout Depth
Cutout Width
44"
(111.8 cm)
Cutout Height
Min.
Above
base rail
NOTE: If the cabinet does
not have a front frame and
the sides are less than 3/4"
(1.9 cm) thick, shim both
sides equally to establish
the cutout width.
Suitable
Bracing
to Support
Runners
5
27" (68.6 cm)
13 1/4" (33.7 cm)
23 5/8" (60 cm) Min.
25" (63.5 cm) Min.
25 1/4" (64.1 cm) Max.
49 11/16" (126.2 cm) Min.
50 1/8" (127.3 cm) Max.
C L
18"
18"
OVER CENTERLINE
(45.7 cm)
OF CABINET
Over Centerline
of Cabinet
2" x 4"
2" x 4" or
EQUIVALENT (5 cm x 10 cm)
RUNNERS
or equivalent
runners level
with bottom
of cutout