ADE TD 2100-1 Manual De Instrucciones página 37

Once the set time has elapsed, the timer will
beep for approx. 1 minute.
The edging of the respective timer selection
button flashes red.
3. Press START/STOP to interrupt beeps or
flashing, or wait approx. 1 minute until the
timer automatically stops to beep.
Instructions for use:
‚ Via START/STOP you can interrupt the
countdown at any time and then start it
running again.
‚ To reset the timer back to zero, press
START/STOP to stop it and then press HR
and MIN simultaneously.
‚ Symbol displayed during countdown: .
37