Using The Stopwatch Function - ADE TD 2100-1 Manual De Instrucciones

Using the stopwatch function

The timer enables to perform two
measurements simultaneously, which are
handled in exactly the same way.
Max. time measurement: 99 hours, 59 minutes
and 59 seconds.
1. Use the timer selection buttons to toggle
the display between
display).
2. Press HR and MIN simultaneously to reset
the display to zero.
3. Press START/STOP to start the timer.
Instructions for use:
‚ With START/STOP you can interrupt the
timer at any time and resume it.
‚ To reset the display back to zero, press
START/STOP to stop the timer and then
press HR and MIN simultaneously.
38
or (follow the
T1 T2