Varian 212-LC Manual Del Usuario página 7

RS232
Input/Output Ports
Cable
to PC
Serial
Number
Label
Figure 2 212-LC Chromatography Pump System, Rear View
10. Turn the power on (both pumps) with the main switch at the rear left
side of chassis. The red LED lamp located on the right side of the
key pad should come on, indicating that the pump is now ready for
operation.
11. At start-up the pump will automatically detect and briefly display the
pump head type and firmware revision.
5
Power Inlet
Module
Fuse Holder
Remote
1 - Not Used
2 - Start
3 - Pressure
4 - Ground
5 - Stop
6 - Common
Fuse
Identification
Label