Samsung WF511AB Serie Manual Del Usuario página 36

troubleshooting
CODE SYMBOL MEANING
SUdS
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
36_ troubleshooting
Downloaded from www.Manualslib.com
WF511ABR-03010A_EN.indd Sec7:36 WF511ABR-03010A_EN.indd Sec7:36
Problem with control.
Sr
A fault is detected in the water
OE
level sensor.
Jammed key.
E2
Temperature sensor problem.
tE
Motor problem.
3E
High/Low voltage detected.
2E
Ag+ Kit problem
7E
Communication error between
AE
SUB PBA and MAIN PBA
SF1 System error
SF2
SF3
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back into the operation.
When it fi nishes washing, "End"
and "SUdS" codes will blink in
turn.
manuals search engine
SOLUTION
Call for service.
Call for service
Call for service
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Call for service
Call for service
Call for service
Reduce the amount of detergent you use.
2011-01-18 2011-01-18 4:15:50 4:15:50