Maintenance Of The Chimney Hood - Simfer 8564SM Manual De Instruccion

6.MAINTENANCE OF THE CHIMNEY HOOD

 Device should be unplugged or switch should be turned off before cleaning
and maintenance procedures.
 Metal filter should be cleaned once a month with hot soapy water or in the
dishwasher, if possible. (60 °C)
 Remove the aluminum cartridge filter by pressing on the spring catches on
the side. Do not refit before drying after wash.
 Outer surface of the extractor hood should be wiped with a damp cloth
soaked with soapy water.
 Make sure electronic parts do not contact with water or similar materials.
 For inox products, using inox cleaning and maintenance products
available in the market will provide longer usage life for your device.
 Aluminum filters can be washed in dishwasher. After several washes,
aluminum filters may change colour. This is normal and filters do not need
to be replaced.
WARNING
When used with devices which use fuel (heaters working with gas, diesel fuel,
coal or firewood, water heaters, etc) and the air in the environment; should be
used cautiously. The chimney hood sending the air out in the environment
may affect the burning adversely.
This warning is not applicable to non-ducted use.
Efficient use of Chimney Hood
 When installing the chimney hood to the air duct, use 150/120 mm
diameter pipes and use bends as minimum as possible.
 Be ware of cleaning periods of metal filters and replacing times of charcoal
filters.
 When dense suction power is not required, use the product in medium
setting.
 For right ventilation, the windows in the kitchen leading to the outside
should be kept closed.
10